FRONT END ASSEMBLY - Includes complete front bumper, header panel, hood with hinges, all lamps including mounting, L&R fenders, core support, unibody rails through shock towers, condenser, radiator and bolt in cooling fans, (Additional available items include, front suspension, cowl vent panels, AC lines and hoses, antenna, mouldings and emblems).

BUMPER - Includes guards, pads, fascia cover, unbolt reinforcement, absorbers, mounting brackets, lamps if bumper mounted, end caps, and applicable fillers.

HEADER PANEL - Includes header panel, grill, L&R headlamps, park and side marker lamps if panel mounted, and all mounting brackets.

HOOD - Includes insulators as optioned, latch catches, bolt on hinges.

FENDER - includes outer skin and inner liner if applicable.

HEADLAMP - Includes headlamp capsule and independent mounting panel with adjusting screws if applicable. (Additional available items include adjacent park, marker, and fog light)

GRILL - includes attaching brackets and fillers.

CONDENSER - consists of condenser core assembly and attached mounting. (Additional available items include condenser cooling fan and A/C lines).

RADIATOR - consists of radiator assembly (core and tanks), and attached mounting. (Additional items available may include radiator cooling fan, external engine and transmission coolers).

COOLING FAN ASSEMBLY - Includes fan motor, shroud, blade and attached mounting. Description is applicable for both radiator and condenser.

AIRBAG - consists of airbag assembly. (Additional available items include dash covers, sensors, and airbag computer).

COLUMN - Includes, all levers and switches, key cylinder, column to first disconnect to the steering gear, cowl and dash. (Additional available items include steering wheel, steering wheel control units, airbag and clockspring).

WINDSHIELD - Glass only. (Additional available items may include surround mouldings and rear view mirror attachment).

DOOR ASSEMBLY - Includes door shell, door latch, weather strips, door window/windows, window channel runs, door window regulator, power window motor and lock actuators if applicable, outside door handle, upper and lower door hinges non welded. (Additional available items include door mirror, mouldings, interior trim panel, side impact air bag, power switches and controls).

DOOR MIRROR - Includes mirror housing and glass, mirror mounting adapter, remote or electrical cabling if applicable.

DOOR GLASS - Includes glass and permanently attached mounting hardware.

DOOR REGULATOR - Includes regulator and power motor if applicable.

CENTER POST& ROCKER - Includes inner and outer pillar and rocker, pillar cut at roofline, rocker cut 2” past sectioning seam and 12” in on floor. (Custom cut available).

REAR CLIP ASSEMBLY - Includes rear bumper, deck lid/hatch assembly, rear finish panel, left and right tail lamps, left and right quarter panels, trunk floor, rear unibody frame rails, back glass as optioned, roof panel inner and outer, body floor pan to first seam. (Additional available items include rear suspension, luggage and roof racks, sun roof glass, moulding, spare tire, jack assembly, interior trim, and fuel tank. Custom cut and special orders available).

LID/HATCH/LIFTGATE/TAILGATE LID - Includes lid panel, latch, lock cylinder, hinged if welded to lid, rear finish panel and third brake lamp if applicable. (Additional available items include hinge assembly, spoiler, luggage rack, power release actuator, lift props).

HATCH - Includes hatch shell, hatch window as optioned, latch, bolt on hinges, rear wiper if optioned, attached weather strips, rear finish panel and third brake lamp if applicable. (Additional available items include spoiler, hatch props; exterior mouldings and emblems, interior trim panel).

LIFTGATE - Includes liftgate shell, back window as optioned, latch, bolt on hinges, rear wiper if optioned, attached weather strips, rear finish panel and third brake lamp if applicable. (Additional available items include spoiler, hatch props; exterior mouldings and emblems, interior trim panel).

TAILGATE (TRUCK) - Includes gate shell, outside handle, inner rod mechanism, side latches, rear finish panel and third brake lamp if optioned.

TAILLIGHT - same as supplied from an OEM Dealer only LKQ.

REAR FINISH PANEL - same as supplied from an OEM Dealer only LKQ.

QUARTER PANEL - Includes inner quarter structure, outer quarter skin, side marker light, inner wheel house and trunk extensions, dogleg and partial rocker, applicable side unibody frame rail, fuel door as optioned. (Additional available items include quarter window, rear suspension, tail lamp, quarter and tail light extensions, exterior mouldings, interior trim).

GLASS - same as supplied from an OEM Dealer only LKQ. Includes all permanently attached mounting hardware (Please order all glass as optioned verifying heat, tint, stationary or moveable when applicable).

TRUCK CAB - Includes cab shell consisting of complete cowl section, windshield posts, roof assembly, rear cab panel, both rockers and floor pan. (Additional available items include door assemblies, windshield, back glass quarter glass, heater/AC housing, complete interior, dash assembly and steering column).

BED/BOX - lift off assembly includes bedsides, floor pan, front bed panel, tailgate, both tail lamps, fuel door(s). (Additional available items include rear bumper assembly, mouldings and emblems).

BEDSIDE - Includes outside skin, inside panel, wheelhouse, fuel door(s) if applicable, cut 12” in on floor and front panel. (Custom cuts available)

FRAME - includes right and left frame rails, all crossmembers, and suspension mounting brackets. (Additional available items include front and rear axle assemblies, springs, and unbolt front suspension).

ENGINE - Includes engine block, All internally lubricated parts, cylinder head(s), valve cover(s), oil pan, intake manifold and timing cover(s). (Additional available items include distributor, coil pack(s), exhaust manifold(s), throttle body, starter, alternator, A/C compressor, engine wiring harness and mounting brackets). IMPORTANT NOTE!!! Many items are left on engine assemblies free of charge for exchange convenience. When these items differ from the original, they must be replaced with the original. All fluid and filters must be changed and external oil coolers and lines must be flushed to assure warranty.

TRANSMISSION - Includes transmission case, all internally lubricated parts, extension and tail housings and transmission pan(s). Automatics include torque converters. (Additional available items include mounts, flywheel, transmission cooler). IMPORTANT NOTE!!! All fluid, filters, and retention seals must be replaced and all transmission cooling lines must be flushed to assure warranty.

TRANSFER CASE - Includes casing and all internally lubricated parts, extension and tail housings, input and output shafts. (Additional available items include mounting hardware, manual shift linkage, electric shift motors, front and rear drive shaft). IMPORTANT NOTE!!! All fluid and retention seals must be replaced to assure warranty.

ENGINE CROSS MEMBER - same as supplied from an OEM Dealer only LKQ. (Additional available items include attachable control arms, sway bar(s), complete knee assemblies, strut assembly, spindle).

FRONT KNEE ASSEMBLY - FWD VEHICLES - Includes strut, coil spring, strut mounting, steering knuckle, hub and bearing assembly. (Additional available items include lower control arms, spindle mounted speed sensors, wheel). RWD VEHICLES- includes upper and lower control arms, and spindle. (Additional available items include spindle mounted speed sensors, wheel).

4X4 FRONT AXLE ASSEMBLY - SOLID TYPE - Differential housing, all internally lubricated parts, axle and axle tubes, spindle and knuckle assemblies, control arms, sway bar. (Additional available items include spring assemblies, brake caliper, other brake parts)

CARRIER TYPE - Carrier case, all internally lubricated parts, CV or U-Joint type axle shafts, attached sway bars, steering knuckle, hub and bearing assemblies, control arms. (Additional available items include spring assemblies, brake caliper, other brake parts).

DRIVE SHAFT - same as supplied from an OEM Dealer only LKQ. (Additional available items include universal joints and end yoke(s)).

REAR AXLE ASSEMBLY - Differential housing, all internally lubricated parts, axle and axle tubes, attached away bar(s), brake-backing plates. (Additional available items include spring assemblies, shock or strut absorbers, brake caliper, other brake parts)

REAR KNEE ASSEMBLY - Includes strut, coil spring, strut mounting, spindle, hub and bearing assembly, control arms. (Additional available items include speed sensors, wheel).

COMPLETE REAR SUSPENSION - INDEPENDENT SUSPENSION TYPE - Includes both right and left rear knee assemblies connected by crossmember if applicable. (Additional available items include speed sensors, wheel).

TRAILING AXLE TYPE - Includes axle beam, right and left spindle, both hub and bearing assemblies. (Additional available items include spring assemblies, shock or strut absorbers, brake caliper, other brake parts).

WHEEL - same as supplied from an OEM Dealer only LKQ.

WHEEL COVER - same as supplied from an OEM Dealer only LKQ.